We continue the series of simple paper models made on a real scale. This time we invite you to glue together a rotary-wing machine, very similar to Mi helicopters. Download, print on a printer, and carefully cut out each part along the contour. Please note: parts 3, 4, 5 and 18, 19 must be made in duplicate. . Draw the fold lines on whatman paper using a needle along a ruler. Before gluing the parts, paint them as desired.

Download the scan.

On a bird's wing!

An unusual glider design, where fallen bird feathers are used instead of wings.

In summer, birds begin to molt. At this time, pick up larger feathers that have fallen out of the poultry yard - they will serve as excellent material for building a flying model. In addition to the feathers, you will need a thin pine strip for the fuselage, a piece of plywood for the nose weight, and two pieces of foam from the TV packaging for connecting parts.

The collected feathers must first be sorted in pairs.

The largest ones, flight feathers, are suitable for wings. You will need three pairs of them. Three smaller pairs will be used to assemble the tail unit. And finally, three tail feathers form the keel.

Assembling the airframe will not be difficult. The ends of the feathers, slats and weights cut from plywood must be sharpened and pressed into the holes.

And do paper helicopter model.

Gluing a paper helicopter model

If you are a beginner and have never done gluing paper models, then when making a helicopter you only need print 7 diagrams - parts development, cut them out and glue them together.

Some tips:

• You can print helicopter parts on a black and white printer. There is no need to use a color printer, because... dark colored helicopter model.
• Use regular office paper, but to make the model more durable, print the helicopter parts twice and make each part two-layered.
• Use small, sharp scissors to cut out small parts. To cut out large parts, you can use a utility knife and a metal ruler. Just be sure to place old magazines under the diagrams of the parts you are cutting out, so as not to spoil the table.
• To ensure that the curves of the parts are neat and even, use a ruler and a non-writing ballpoint pen or sticker. Attach a ruler to the bend line, draw a pen (sticker) along it and bend it.
• To glue helicopter parts, it is better to use a dry glue stick. It is advisable to buy a fresh glue stick, then the surfaces to be glued will be more durable.
• If you plan to use liquid glue, use a brush to ensure that the parts are glued together neatly.

Paper helicopter parts diagrams

Paper helicopter model - printable diagram 1

Paper helicopter model - printable diagram 2

Paper helicopter model - printable diagram 3

Paper helicopter model - printable diagram 4

Paper helicopter model - printable diagram 5 (helicopter paper model)

Paper helicopter model - printable diagram 6 (helicopter paper model)

“Making a model of an airplane and a helicopter from colored paper with your own hands.” Master class with step-by-step photos

Degtyartseva Natalya Vasilievna, teacher of MAU DO DDTT, Vladikavkaz, Russian North Ossetia - Alania
The work is intended for children aged 7 years and older, teachers and parents.
Purpose: interior decoration, a gift for family and friends, an exhibit for an exhibition of technical creativity.
Target: make an airplane and a helicopter from colored paper with your own hands.
Tasks: educational - master the methods of manufacturing airplanes and helicopters; developmental - to develop the practical skills of students when working with scissors, a tool for cutting paper, to develop fine motor skills, imagination and fantasy of the child; educational - to cultivate aesthetic taste.
Materials and tools: colored paper, paper cutting tool, scissors, glue stick.

Puzzles
for children about an airplane and a helicopter.

Not a bird, but a flyer
Not a truck, but with a cab,
Not a bat, but with wings.
(Airplane)
For him, his home is
This is our airfield.
He's come a long way
To get some rest.
And when he rests,
Will take flight again.
(Airplane)
Who can tell me what kind of bird it is?
In the sky, like the wind, rushes,
White draws behind himself
A trace in azure blue?
And the pilot is driving it! –
What is this? - … (Airplane)!
What kind of bird:
Doesn't sing songs
Doesn't build a nest
Is it carrying people and cargo? (Airplane)
An iron bird flies in the sky,
Leaving a trail, making noise and buzzing -
It takes people to distant lands...
This is not a dove or a sparrow.
(Airplane)
Big bird -
Steel mare
Flying across the sky
The people sit inside it.

(Airplane)
He's in the vast ocean
The cloud touches the wing.
Will unfold under the rays
Casts silver...
(Airplane)
Thunder rumbles in the skies
And not a cloud around.
The song sings loudly
Rotary wing (Helicopter)
V. Struchkov

Miracle – Yudo - Dragonfly
Glazed eyes.
If it rotates its wings,
Feels every wind.
(Helicopter.)

Iron Bird
It's spinning in the sky.
(Helicopter.)
The car is hanging in the air.-
Stands still. Doesn't fly.
She saves souls
At sea and on land.
(Helicopter)

Who's to the high skies
Raises his belly himself.
There are troops in the belly
For a sudden rush.
(Helicopter.)
What kind of fan is this?
Are you hovering above the ground, guys?
And it roars and rumbles,
Even though it doesn't have wings, it still flies?
(Helicopter)
Silver belly
Spinning ear.
Spinning, buzzing, shaking -
In the sky, like a bumblebee, rushes.
(Helicopter.)

Progress of step-by-step work.

Making an airplane from colored paper.

Cut 3 strips, 2 cm wide for the main parts of the aircraft and several strips 1 and 0.3 cm wide for decorating the parts of the aircraft.

Glue the edges of one wide strip to form an oval. Cut the other strip in half, fold it into unequal parts and press along the fold. Then fold these strips into unequal parts on the other side to form two folds at a distance of 0.3 or 0.5 cm.

Cut corners off airplane wing parts. Press the oval at a distance of 2/3 of the length of the oval and glue the sides of the oval to each other.

Make two folds 0.5cm apart on the tail of the plane. Glue the stripes decorating the wings and base of the plane.

Glue the wings to the base of the plane.

Make airplane wheels from 3x1cm strips.

Glue the wheels to the back of the plane.

Decorate the plane with triangles and other figures left over from cutting out the plane parts. The plane is ready.

Making a helicopter from colored paper.

Prepare parts for a helicopter in the same way as airplane parts. Make an oval from a 20cmx2cm strip. Let's make the tail of the helicopter, as shown in the photo. Cut and round the edges of 4 strips 3x0.5mi and 2x0.3cm. Let's fold the edges of one strip of different sizes. An airplane can also be made from these parts. We will make wings for the airplane, as shown in the photo.

We will paste a blue stripe, 0.5 cm wide, to decorate the main parts of the helicopter. To decorate the propellers, cut out strips with rounded edges half the size of the propeller blades.

Let's glue the wings for the airplane, as shown in the photo.

For a helicopter: glue two yellow strips with curved edges to attach the propellers. We glue the propeller blades at one point, as shown in the photo. Let's make the sides from 7x2cm rectangles, bending the edges for gluing 0.5cm. Decorate the sides with strips of blue paper.

Let's glue the sides and wheels to the helicopter.

Our helicopter is ready.

This is what our colored paper crafts look like: an airplane and a helicopter.

Adviсe.
1. It is better to make the main parts of an airplane and helicopter from thick colored paper, and make decorations from paper of regular thickness.
2. It is better to fasten the main parts with PVA or “Moment” glue for more thorough fastening.
Thank you for your attention. I look forward to your feedback.

Very funny model! When a helicopter descends to the ground, it does not fall sharply down, but spins around its axis. This happens because our model has blades. The air flows around these blades and the helicopter lands smoothly and beautifully. The model is easy to manufacture. Its only difficulty is the need to divide the paper into equal parts using a pencil and ruler. For a primary school student, such a task is not only feasible, but also useful. And preschoolers will cope with the work if you help them. Having learned to confidently fold the model, you will be able to do without a ruler, doing all the work “by eye”.

Necessary materials:

• Paper
• Scissors
• Ruler and pencil
• Paper clip

Step 1

Draw on a sheet of paper and cut out a strip of paper measuring 21x5 cm. Draw a vertical line in the middle. You don’t have to draw a line, but mark it with a fold - fold the strip in half, then straighten it - that’s where the line is drawn.

Step 2

A third of the strip – 7 cm – bend downwards

Step 3

Unfold the paper and make a cut in the middle, up to the fold line.

Step 4

Draw a line just below the fold line. Divide this line into four segments.

Step 5

Make cuts on both sides along the marked line, cutting a quarter of the width of the paper on each side.

Step 6

Fold one side towards the center and smooth it out well. Fold the other side in the same way.

If you want to spend productive time with your child, then paper origami is a great option. If you have a girl, you can make flowers and various animals with her. But if you have a son, then you definitely need to know how to make a helicopter out of paper. Any boy will be interested in designing such a toy together with his parents.

What materials are needed

If you are interested in how to make a helicopter out of paper that flies, then you need to purchase special materials for its manufacture. This:

• Thick paper. You can buy multi-colored sheets of A4 size, and then choose paper of a suitable color with your child. Usually just one sheet is enough to make a helicopter. If you can’t buy cardboard, you can use regular paper.
• Clip. With its help the lower part of the toy will be held. Under no circumstances should you glue parts together, as this will prevent the helicopter from flying.
• Pencil. It should be used to outline all the details. By the way, a regular pen may also work.

Dimensions of the future toy

Many people are interested in how to make a helicopter out of paper, for which only one sheet of paper would be enough. Of course, in this case the paper toy will be very small. If you want to make it big, then you need to take whatman paper. However, it is best to do small helicopters with a child. If necessary, the A4 sheet needs to be shortened. You should end up with a rectangle measuring 3 cm wide and 14 cm long.

How to draw details

How to make a paper helicopter with your own hands? Yes, very simple. But first you need to prepare all its parts, which will later be fastened together. The main part is prepared as follows: you need to draw a line in the center of the sheet along the length and width, you will get two intersecting lines. It is these stripes that will indicate cuts and folds. Using them it will be easy to understand how to make a helicopter out of paper. In principle, you can do without it, but it will be much easier.

Paper folding

After this, fold the paper in half. It needs to be cut to the middle of the formed fold. The result will be two wings, which will later become the wings of the helicopter. If you don’t yet know how to make origami out of paper (helicopters, in particular), then you need to act very carefully. It must be remembered that paper is a very delicate material, so you need to work with it very carefully.

Final stages of work

Now you need to cut the sheet in two parts along the length of the paper. These cuts should be located cm below the first slits. After this, it is necessary to fold both lower sections towards the center, creating helicopter flaps. The central fold should be divided into two folds, which form the lower section of the toy. For secure fixation, you must use a paper clip. In addition, it will add a little weight to the toy, due to which the helicopter will not fly to the side due to the slightest gusts. It is not recommended to lubricate parts with glue, as this may prevent the device from flying. Then you can straighten the upper part (wings), after which the outline of the helicopter will be visible. Now you know how to make a helicopter out of paper. But that is not all. You need to check if it flies. If this does not happen, then something was done incorrectly.

However, not everyone is able to create a helicopter using this method. Therefore, you can use a simpler option. Many people are interested in how to make a helicopter out of paper, the diagram of which is already available in finished form. In this case, you just need to take the template, the photo of which is located just below, after which you need to transfer it to paper and cut it out. Where the dotted line is shown, the paper should be folded. This will make a good helicopter, but its creation is much faster.

What to do if the helicopter does not fly

If the helicopter does not fly, then it is unlikely to be corrected. The only option is to make a new one. But before you start creating it, you need to determine why the first toy did not fly. When a helicopter flies, it is pushed by air in the opposite direction, so the blades begin to move up and down. It is for this purpose that the spinner consists of two blades, each of which should receive the same push in different directions. This is what makes the toy fly. If this does not happen, then the toy was created incorrectly. Therefore, you need to determine what exactly is wrong with it.

Perhaps the wings turned out to be different sizes, so one of the sides receives a greater load, which is why the helicopter is pulled down. As a rule, it falls on one side. If the rotor blades are of different sizes, then it will not spin, so the helicopter will fall vertically. It may also fail to fly due to the fact that glue was used during the work process. The parts glued together will have a smaller area of ​​contact with the air, so this will pull the toy down. But even the worst helicopter can fly if you take it outside in windy weather.

Now you have learned how you can make a helicopter at home with your child. Of course, the baby should only participate in the work, and all the main stages rest on the shoulders of the adult. If you entrust all the work to a child, the device is unlikely to fly, which is why he will be upset.