Everyone wears glasses, some for vision, some from the sun. But no matter what the glasses are used for, they need a case or case so that they do not scratch or deteriorate. A crochet case for storing glasses can serve as an excellent gift, as it will be original. In addition, it can be tied to any outfit - this is its unequivocal advantage!

Watch the video for another way to implement such an idea.

A step-by-step master class on knitting a crochet case for glasses

In order to make a case for glasses with your own hands, you need: yarn of any color (you can combine colors), hook No. 5.5.

The finished product is obtained in a standard size of 10 * 16 cm.

Basic pattern for fast and high-quality product creation

1st p. Bases: starts with the 2nd air loop. You need to pull up a loop on each chain loop and keep all the loops on the hook.

2nd p. Foundations. Yarn over and pull through 1 loop on hook, then combination: yarn over and pull through 2nd loop. Repeat this combination until the end of the row.

2nd p. Yarn over, then pull through 1 loop and repeat this combination to the end of the row: yarn over and pull through 2 loops on the hook. Repeat 1-2 rows.

Now let's move on to the glasses case. Cast on 17 air loops. Start with the 2nd air loop from the hook. Pull up a loop on each chain stitch. Rotate product.

1st p. Knit as the second row of the pattern.

2nd p. It is necessary to skip the 1st column, then repeat this combination to the end of the row: insert the hook into the next column from right to left, pull out the loop. Rotate product.

3rd p. Knit as the first row.

4th p. Knit as the second row. Rotate product.

Valve to continue knitting the cover

Knitting takes place without tearing off the thread from the main "body" of the cover.

1st p. Skipping the first column, knit to the end of the row the following combination: the hook is inserted from right to left into the next column and the loop is pulled out. Rotate product.

2nd p. Yarn over and pull through one loop, then repeat this combination to the end of the row: yarn over and pull through 2 loops. Do not turn.

3rd p. Knit in the same way as the first. Rotate product.

4th p. It knits similarly to the second. Do not turn.

Then follows the reduction of the valve loops.

1st p. You need to skip one vertical column, insert the hook through 2 columns and pull out the loop, then insert the hook into the next vertical column and pull out the loop. Continue knitting in this way until 3 stitches remain. After that, insert the hook into the next two vertical columns and pull up the loop. Knit the last column.

2nd p. Yarn over and pull through one loop. Further, to the end of the row, repeat this combination: yarn over and pull through 2 loops.

3rd p. It is knitted similarly to the 1st row.

4th p. It is knitted similarly to the 2nd row.

Repeat rows 1-4 until 5 stitches remain. Then you need to knit the three middle columns together, and knit the last column. Pull the thread through the remaining columns and fasten the thread.

If the technique of knitting a case was easily given to you, be sure that it will not be difficult for you to figure it out! So it remains only to tie all the accessories in the same style.

Assembly of the product is quick and easy with a description

Now you need to sew the sides of the product together. Tie all seams, including the valve, with single crochets. Sew a button. If desired, you can tie a cord around your neck or on your arm.

Thus, additional accessories can be connected.

For example, as in the photo.

Patterns can be selected in a variety of ways. You have to let your imagination run wild. You can make a cover from individual parts, for example, multi-colored circles, connected together as in the photo.

Or, after considering the patterns of patterns, you can knit a case for glasses in the shape of an animal. It can be presented to a child, it will also decorate the style you have chosen. An example of such an accessory can be seen in the photo.

The cover can be decorated with any accessories - beads, knitted flowers or butterflies. With your own hands, using simple patterns, you can create a very cute and delicate accessory, as in the photo.

As a result, having considered the patterns and design examples, you can knit your original case, which will surprise and delight everyone.

Schemes for creating a wonderful home accessory

Here is such a wonderful accessory for your glasses you can make at home!

Time and labor costs are minimal! But the result will definitely surprise you! The scheme is shown in the photo below. True, it is written in Chinese - which cannot but make it difficult for a beginner needlewoman. But for those who are familiar with the crochet technique, it will be understandable, because the main thing is shown schematically.

And here is another version of a very beautiful women's glasses case.

Immediately, we present the scheme for it.

And is created in the same way, just increase the size to the size you need!

Now, as they say, everything is in your hands! Train, experiment and let the inspiration never leave you!

Finally, an interesting training video, be sure to watch it:

Everyone wears glasses, some for vision, some from the sun. But no matter what the glasses are used for, they need a case or case so that they do not scratch or deteriorate. A crochet case for storing glasses can serve as an excellent gift, as it will be original. In addition, it can be tied to any outfit - this is its unequivocal advantage!

Watch the video for another way to implement such an idea.

A step-by-step master class on knitting a crochet case for glasses

In order to make a case for glasses with your own hands, you need: yarn of any color (you can combine colors), hook No. 5.5.

The finished product is obtained in a standard size of 10 * 16 cm.

Basic pattern for fast and high-quality product creation

1st p. Bases: starts with the 2nd air loop. You need to pull up a loop on each chain loop and keep all the loops on the hook.

2nd p. Foundations. Yarn over and pull through 1 loop on hook, then combination: yarn over and pull through 2nd loop. Repeat this combination until the end of the row.

2nd p. Yarn over, then pull through 1 loop and repeat this combination to the end of the row: yarn over and pull through 2 loops on the hook. Repeat 1-2 rows.

Now let's move on to the glasses case. Cast on 17 air loops. Start with the 2nd air loop from the hook. Pull up a loop on each chain stitch. Rotate product.

1st p. Knit as the second row of the pattern.

2nd p. It is necessary to skip the 1st column, then repeat this combination to the end of the row: insert the hook into the next column from right to left, pull out the loop. Rotate product.

3rd p. Knit as the first row.

4th p. Knit as the second row. Rotate product.

Valve to continue knitting the cover

Knitting takes place without tearing off the thread from the main "body" of the cover.

1st p. Skipping the first column, knit to the end of the row the following combination: the hook is inserted from right to left into the next column and the loop is pulled out. Rotate product.

2nd p. Yarn over and pull through one loop, then repeat this combination to the end of the row: yarn over and pull through 2 loops. Do not turn.

3rd p. Knit in the same way as the first. Rotate product.

4th p. It knits similarly to the second. Do not turn.

Then follows the reduction of the valve loops.

1st p. You need to skip one vertical column, insert the hook through 2 columns and pull out the loop, then insert the hook into the next vertical column and pull out the loop. Continue knitting in this way until 3 stitches remain. After that, insert the hook into the next two vertical columns and pull up the loop. Knit the last column.

2nd p. Yarn over and pull through one loop. Further, to the end of the row, repeat this combination: yarn over and pull through 2 loops.

3rd p. It is knitted similarly to the 1st row.

4th p. It is knitted similarly to the 2nd row.

Repeat rows 1-4 until 5 stitches remain. Then you need to knit the three middle columns together, and knit the last column. Pull the thread through the remaining columns and fasten the thread.

If the technique of knitting a case was easily given to you, be sure that it will not be difficult for you to figure it out! So it remains only to tie all the accessories in the same style.

Assembly of the product is quick and easy with a description

Now you need to sew the sides of the product together. Tie all seams, including the valve, with single crochets. Sew a button. If desired, you can tie a cord around your neck or on your arm.

Thus, additional accessories can be connected.

For example, as in the photo.

Patterns can be selected in a variety of ways. You have to let your imagination run wild. You can make a cover from individual parts, for example, multi-colored circles, connected together as in the photo.

Or, after considering the patterns of patterns, you can knit a case for glasses in the shape of an animal. It can be presented to a child, it will also decorate the style you have chosen. An example of such an accessory can be seen in the photo.

The cover can be decorated with any accessories - beads, knitted flowers or butterflies. With your own hands, using simple patterns, you can create a very cute and delicate accessory, as in the photo.

As a result, having considered the patterns and design examples, you can knit your original case, which will surprise and delight everyone.

Schemes for creating a wonderful home accessory

Here is such a wonderful accessory for your glasses you can make at home!

Time and labor costs are minimal! But the result will definitely surprise you! The scheme is shown in the photo below. True, it is written in Chinese - which cannot but make it difficult for a beginner needlewoman. But for those who are familiar with the crochet technique, it will be understandable, because the main thing is shown schematically.

And here is another version of a very beautiful women's glasses case.

Immediately, we present the scheme for it.

And is created in the same way, just increase the size to the size you need!

Now, as they say, everything is in your hands! Train, experiment and let the inspiration never leave you!

Finally, an interesting training video, be sure to watch it:

Today I have a somewhat unusual little thing - a case or case for glasses. I decided to publish a simple variation at the request of one of the subscribers. I hope that the description is useful to someone else.

Description of knitting

Size: 9 x 19 cm

You will need: 50 g light blue Limone yarn (100% cotton, 125 m / 50 g); Tunisian hook number 2; black Velcro closure measuring 2.5 x 5.5 cm.

Tunisian knitting: one sample always consists of two rows (front and back). Knit only on faces. side of the work without turning it.

1st p. (= persons. R.): 1 air. p., insert a hook into each air. p., pull up a loop, leave all the loops on the hook, do not turn the work.

2nd and 4th p. (= out. R.): 1 air. n., knit all the loops on the hook one after the other, that is, always knit 2 sts with a crochet until 1 st remains.

3rd row: insert a hook into each st under the broach of the previous row and pull out 1 st.

Run 1 time from the 1st to the 4th p., Then repeat the 3rd and 4th p.

Completing of the work: tie a chain of 31 air. p. and perform in the Tunisian technique 39 cm, then subtract on both sides in each p. 11 x 1 p. \u003d 9 p. Next, knit a straight fabric and after 45.5 cm from the start of work, finish with one row of st. b / n, introducing a hook under the broach of the previous row.

Assembly: unscrew the lower 19 cm of the part and connect the side seams from the faces. sides of Art. b/n. Pull the Velcro through the tip of the valve and sew. Sew the second part of the fastener on the front side of the case or tie a small tongue. To do this, on 9 p., perform 2 cm in the Tunisian technique. Pull the tongue through the clasp and sew, as in the photo.

Case for glasses with knitting needles

Well shown how to get started.
Further, it is important: We read the picture and collect the beads from top to bottom, from right to left.
Yaroslav - you knit bundles, so there should be no problems with knitting - the system is the same.
When I knitted mine, I collected beads in 3 stages. First, I typed the main background, without calculation. I knitted 10 rows (for the upper slice. I tried everything - it seemed to me the fastest and most successful), cut off the thread, removed the extra beads.
Then I strung the whole drawing. Tied up. I cut off the thread - I picked up the main background again. Knitted to the size I needed.
I ended up knitting a row without beads for both slices. Then I sewed a zipper.
I have a drawing of a curve, but this is not because I did something wrong, but because I unsuccessfully drew the diagram and picked up the colors of the beads (I drew the diagram myself). Yes, and the beads are the most that Nina is - Chinese As they say - a training case
I also knitted the bottom of the first row without beads. I recommend immediately with beads - the girls say, then the bottom is beautiful. I got a perforated one - I had to sew

The cover, of course, is not an indicator at all, but for the sake of having an idea, I’ll show what happened, in principle, what I drew

Also - since this is not a tourniquet and the knitting is not spiral - at the end of each row it is imperative to make a rise - knit 1 VP without beads.