Nowadays, it is becoming increasingly difficult for every person to live without a wallet, because this is the very thing where you can carefully store all your money and discount cards without fear of leaving most of these things at home. It’s no secret that such accessories are becoming more and more expensive every month - for this reason, many ladies have the question of how to make a wallet with their own hands. From this article you will learn several ways to make such an original, convenient and durable thing..

Making a fabric wallet

This master class will describe in detail how to make a fabric wallet from two colors, which, in turn, has a magnetic clasp.

Important! Here you can safely experiment with your favorite color combinations, because your future wallet will be unique, which cannot be said about purchased models.

Making such a wallet is as follows:

• Choose in a store or order a beautiful fabric to suit your taste and get printed material - felt can play its role, the dimensions of which will be approximately 30 by 20 cm.
• Lay it out on the wrong side so that approximately 10 mm is left on all sides, then draw a line along the contour.
• Trace the felt with a pencil - this is necessary in order to see where to sew the material.
• Carry out the same manipulations with another piece of fabric.
• Connect both materials to each other, removing the felt and placing the right side down and the wrong side up.
• Sew three sides and leave one short side (20 centimeters).
• Turn the structure right side out and place felt of a suitable size in the resulting “bag”.

Important! Before you start sewing the fourth side, you need to carefully tuck it inward - first the corners, then everything else.

• Decide which side will be the front side in order to make a fabric wallet.
• Divide the rectangular workpiece into three parts (the first and third are identical, the one in the middle is the smallest).
• Sew the two parts together. Leave the third so that the product closes.

The base of the wallet is ready. All you have to do is sew on decorative elements to your taste - they can be beads, rhinestones, embroidery and much more.

How to make a leather wallet?

This stylish accessory can suit both the fair and the stronger sex. Just like a regular wallet, you can store bills, change, discount and credit cards in it. Making such an accessory is very simple, and even novice craftswomen can do it.

You can sew a wallet with your own hands by following this algorithm:

• Prepare a piece of artificial or natural leather from which the product will later be sewn.
• Trace 6 prepared parts, cut them from the prepared flap.
• Attach the individual pieces together using a good quality leather glue.
• Modern sewing machines have many programs that help save the needlewoman’s precious time and effort. In order to sew a zipper to the product, you need to use the fourth part.
• Part number 5 (which is folded like an accordion) is glued under the zipper, while the second free end is attached under it.
• To make the product stronger, you need to use a sewing machine, attaching the processed parts to the third part.

Important! The 3 parts of part number 6 must be cut perfectly, and they must also fit perfectly with the second part of the third part.

• Connect them so that they are located 1 cm from each other, then go over them with a machine in order to sew a leather wallet with your own hands as durable as possible.
• Connect the outer parts of the blanks for the pockets with the parts of the second part, and with the inner ones - do not carry out any manipulations.
• Proceed to sewing parts No. 1 and No. 2 - all parts should match perfectly, there should be nothing superfluous.

Following this pattern, you should get a beautiful and high-quality accessory that will serve you for a long time.

Making a beaded wallet

To make such an original accessory, you should prepare several items:

• Set of beads - you choose the color and size.
• Denim thread.
• Hook - its number is selected based on the size of the beads.
• The clasp is also chosen to suit your taste.
• Sharp scissors.

In order to make a wallet with your own hands at home, you should follow this procedure:

1. You need to start working from the top rows, putting 18 beads on the prepared thread, which were multiplied by 7. Then each row from left to right, top to bottom, repeating the procedure 7 times.
2. Cast on a 7-loop chain, close it in a circle and knit one row of single crochet in each loop.
3. The next row needs to be knitted with two single crochets, alternating one loop with beads and the other in the same loop without it. Follow this technique to the end.
4. The third row is in each loop, adding a bead and knitting a single crochet.
5. When the desired height of the wedges around the entire circle is finally knitted, tie it without using beads, starting in the middle with 3 single crochets.
6. When 3 rows of beads and 3 rows of single crochets are knitted, you need to start stitching. To attach the clasp, it is recommended to use monofilament thread.

Important! In order for the workpiece to gradually expand, it is necessary to knit a single crochet into a loop with beads at each end of the segment.

In this master class, not all needlewomen can make a wallet with their own hands, however, a neatly knitted accessory will always please the eyes of others and nurture your ego.

Decorating the finished product

There are many ways to decorate such an accessory. The main ones include:

• Cross stitch or satin stitch.
• Gluing beautiful rhinestones and appliques.
• Sewing on buttons, beads, seed beads, decorative flowers, sequins, mini pom-poms.
• All kinds of pockets and fasteners.
• Satin ribbons in pastel colors add more delicacy to the product. They can be used by collecting small flowers from them. The width of the ribbons can be absolutely any - it all depends on your taste.
• You can use additional decorative fabrics - they give the accessory more sophistication.

If you still can’t decide how to decorate your wallet, go to a craft store - there you will find many decorative elements that can be used to transform the accessory you made. In the windows you will see a lot of ribbons and fasteners that will give your product some charm.

I decided to start with a small master class on making a wallet with a convenient compartment for small change.

The production time (3 hours) is indicated incorrectly, because we need to order punches and some other small items from the online store, and the speed of their delivery to your home depends on the efficiency of the Chinese and our postal service. After about a month and a half, you are ready to start!

The photo below shows the tools and materials we will need.

Leather will require a minimum of 10 square decimeters.

First, we make paper patterns on a scale of 1:1 and cut them out. We transfer it to the skin and cut it out again. We get this beauty.

While two parts are resting under the books, we waste no time punching out the remaining parts. I have punches with round holes with a diameter of 1 mm, the hole pitch is 5 mm. I retreat 5 mm from the edge of the workpiece and punch holes.

On the flap of the coins department, I round the corners at the same time; you can simply attach a coin of a suitable diameter and cut off the excess with a knife.

We remember about the strap and cut it out. I take a width of 2 cm, make the length longer, about 7 cm - then we cut it to fit. The parts have dried under the press, take them out, punch them, also retreating 5 mm from the edge.

That's it, we're great, we've prepared all the details for stitching, we can get started. We take the inner large part of the wallet and three pockets for cards, sew ONLY on top.

On the other side of the cards, according to our design, we have a pocket for small change, so we take all the parts needed for it and stitch it from the middle of the wallet clockwise to the upper right corner.

Along the way, we cut out a small piece for the strap (I think it’s clear in the picture), the width of the cutout is 2 cm, the length is 1 cm, we place the strap in the center. The cutout for the strap is needed so that on the finished product it does not stick out from the back of the wallet.

Next, we apply the outer part of our wallet and sew all the parts on the side of the coin pocket with one seam, not forgetting to add a second bent insert and a strap. I got a little carried away here and didn’t take a photo at this point, sorry. After that, we finish the section for small items, I think it’s clear from the photographs.

This is how it turned out that the right side is almost ready, we take the left one, combine the holes and sew the left side with one seam, starting from the upper left corner and ending with the “middle” of the wallet.

As you can see, the strap is sewn between layers of leather, no irregularities are observed.

We install the buttons, beat off the seams with a hammer, cut the strap to length, and proceed to align the ends. Since this leather is quite soft, I sand it with sandpaper, starting with quite coarse sandpaper (I don’t know its grit) and ending with 2500 grit. I don’t like the coloring of the ends, it looks kind of rubbery, so I chose this path for myself.

After half an hour of “sanding” the ends, we have a finished product, we are amazing!

Thank you for your attention. If you use my master class somewhere, please provide the link.

www.livemaster.ru

Making a wallet from genuine leather – Crafts Fair

In order to make a leather wallet, you will need the following tools and materials: hammer, 3 mm punch, rulers, utility knife, scissors (best for leather), marking pen, ballpoint pen, wood chisel with a rounded blade, thread, ruler with circles of different diameters, cardboard 0.5 mm, genuine leather 1.5-2 mm.

You will also need equipment: a sewing machine.

To do this, take 0.5 mm cardboard and, using rulers, build a T-shape with a strap, according to the dimensions indicated in the photograph. The overall size of the pattern is 321x173 mm.

After cutting out the shape, use a knife to make 4 slits according to the dimensions indicated in the photo. Where the slots end, use a 3 mm punch to make holes.

Using a ruler with circles of different diameters, you need to make a rounding on the strap. In our case, the diameter of the circle is 20 mm. Place a ruler on the edge of the strap, trace it with a ballpoint pen and carefully cut it with scissors.

Let's move on to cutting the leather. Take the skin and place the pattern on it.

Using a ruler and knife, cut the cut. Without removing the pattern from the skin, punch holes using a 3 mm punch along the pre-made holes and make slits.

Using a pattern marking pen, draw a curve on the strap, and use scissors to trim the leather. If you wish, you can take a piece of sandpaper and sand the rounded area.

Now you need to round the corners; to do this, take a wood chisel with a rounded knife and a hammer. Applying the chisel to the corner, use a hammer to make them round.

And now you have a ready-made wallet cut.

First, fold the card pocket and tap the fold with a hammer.

Secondly, bend the left side without the strap, and tap the fold in the same way.

And finally, bend the right side with the strap, tap the bend and insert the strap into the hole for it.

When folded, the size of the wallet is 85x80 mm.

And now, we can say your wallet is ready.

You can insert 1-3 cards into the slot in the inner pocket.

As a decorative design, you can apply hot stamping using a cliche and an embossing machine.

If you do not have this equipment, then you can use punches, a burner, and acrylic paints on leather.

www.livemaster.ru

patterns and master class with step-by-step photos and video tutorials

A wallet is one of the most important accessories in both men’s and women’s wardrobes, so it is advisable to buy or make it from natural materials, which are more practical to wear and look presentable. A DIY wallet is a great way to express yourself in handicrafts and do something new and interesting. We all know and understand that something made with our own hands is always dear to the heart and you want to wear it. A leather wallet can be an excellent gift for a birthday, Defender of the Fatherland Day or another holiday. In today's master class we will look at the option of creating a wallet made of leather - the most popular and practical material for a wallet.

Let's get to work. First of all, you need to prepare the patterns. Thick paper is perfect for these purposes. The pattern must fully correspond to the size of the wallet, and also reflect all the pockets and holes.

We take a piece of leather, attach patterns to it, outline them evenly and cut out all the details of the future wallet. To make the lines evener, it is better to use a ruler.

Experienced craftsmen who often deal with leather know that it must be treated with special chemicals to ensure that the leather is smooth and has a pleasant tint.

It's time to cut out all the pockets. This must be done with extreme caution so as not to tear or stretch the skin. Using a knife and a ruler, carefully make all the cuts.

Now let's take the lining fabric that is needed for the pockets and cut out 6 squares from it. On the wrong side of the leather, where the slits are marked, we glue the lining fabric. It is better to do this with glue rather than stitching with threads, so as not to get rough and very convex seams.

Now you need to glue the parts together. To do this, the edges that will be treated with glue need to be rubbed a little with sandpaper. Instead of a glue brush, you can use ear sticks. Glue and wait for the glue to set and dry. After that, let's go over the glued edges with a hammer. In order to check how evenly the pockets are located relative to each other, you can insert plastic cards.

Next, you need to glue the inner and outer parts of the wallet. We do this according to the principle described above. We round the edges of the purse and mark holes for the seams using a special device - a fork punch.

We select the threads and begin stitching - the most painstaking and monotonous, but very important process. In order to facilitate this process and reduce the time spent, we recommend purchasing or renting a special device for securing the workpiece - a saddler.

After the wallet has been stitched, you need to process the ends of the product, since without this the wallet will look unfinished. For this you will also need a special device - an engraver. With its help, the ends are easily polished and the glued layers are leveled.

Now you will need simple CMC wallpaper glue, which needs to be used to process the edges of the leather. It should be applied to the ends and rubbed using a special attachment on the engraver, then the edges will be perfectly smooth.

Once you have the tools, you can leave the embossing on your wallet. The result is such a chic wallet that no one can distinguish from a store-bought one.

If you liked the idea of ​​​​creating such a leather wallet, then, of course, you will simply need special tools for the work. In order to first just familiarize yourself with them, and then purchase them, we present a list of everything you need.

• A roller knife is convenient for cutting leather, as it does not wrinkle it. You can buy it at any hardware store;
• Stationery knife – convenient for cutting corners;
• Metal ruler;
• Awl;
• Needles for sewing leather;
• Wooden trowel – convenient for rubbing edges with wax or special means;
• Scissors for cutting threads - preferably small ones;
• Seam ripper - to correct the work if it was sewn wrong;
• Tortsbil - for cutting chamfers from the edges of the leather;
• Cutters for leather - used so that the seam does not stand out too much;
• The pliers are small - they are convenient for removing a stuck needle;
• Cutting mat - easy to mark and cut on;
• An unnecessary board to put under while punching holes with an awl, so as not to damage the table or other surface on which you have to work.

In order to study in more detail the rather difficult topic of creating a leather wallet with your own hands, we invite you to watch several videos that will help you more clearly imagine the entire process of work.

Video

sdelala-sama.ru

Leather wallet and business card holder

Leather wallet

Diagram 1 shows a list of wallet parts with dimensions and quantity. All details are cut in the form of rectangles. The exceptions are parts numbered 4 and 5. Part 4 has a deep slot for a zipper 7 mm wide, which does not reach the opposite side by 1 cm. Part 5 is a polygon of complex shape.

1. First, let's cut out these parts from leather. This can be conveniently done using templates of parts that can be cut out of plain paper (Fig. 2). We place these templates on the skin and trace them with a silver helium pen (Fig. 3). This pen is convenient because it is easy to wash.

It is best to take shoe or haberdashery leather with a thickness of 1.2-1.4 mm or 1.4-1.6 mm of medium hardness, not soft.

2. Next, we begin to glue the parts of the wallet with Moment glue, preparing them for joining on the machine. We glue a zipper into the slot of part 4 (Ill. 4), bend and glue the allowance of the bottom tape, as shown in Illustration 5a. This will be the entrance to your change pocket. Then we glue part 5 (ill. 5b). Next, we stitch the resulting assembly on the machine from the front side of the parts as shown in Fig. 6 (red dotted line). Then we apply glue to the places shown by the blue arrow and glue them together, bending part 5 along the green arrows.

After this, we stitch the resulting structure on a machine, as shown in Fig. 7 (red dotted line), and glue it along the perimeter to the first part 3, aligning the upper left corners. Then we machine stitch along the red dotted line (Fig. 8). The knot with a pocket for small change is ready.

3. To the second part 3 we glue all three parts 6 in turn (Fig. 9). We cut the corners of the two internal parts 6 at a bevel (Fig. 9b) so that they do not stand out too much when the parts are applied.

Parts 6 are glued one above the other, offset relative to the longitudinal sections by 1 cm (Fig. 10). These will be pockets for plastic cards. Now you can machine stitch the parts together where we glued them. It should look like shown in illustration 11. The assembly with pockets for cards is ready.

5. All that remains is to glue and connect parts 1 and 2 with machine stitches. Glue them with the mesh sides inward (ill. 13). Please note that part 1 is larger than part 2 in both length and width. Therefore, a so-called “wave” is formed in the middle (Fig. 14), which is needed to make the wallet convenient to use.

After joining these parts with machine stitches, we get the finished product: a wallet with one main compartment for bills, two large pockets, three pockets for cards and a compartment for coins (Fig. 15).

Business card holder

1. List of parts - in diagram 2. Just as in the case of the wallet, cut out templates from paper, apply them to the skin, trace them and cut them out with a knife along a metal ruler. For parts 3, it is advisable to choose a softer place on the skin, since in the finished product they will always be folded.

2. For part 1, make a cutout on top for the finger (Fig. 16). On the mesh side of part 1 we glue part 2 with the mesh side up (ill. 17 and 18). Then we adjust part 2 along the lower cut, as shown in illustration 19.

Now we glue (Fig. 20) onto the resulting structure and adjust (Fig. 21) the longitudinal sections of parts 3 (side inserts). Apply glue to the free longitudinal sections of parts 3 and the areas on the main part 1 where they will be adjusted (Fig. 22). To determine the location of the stitching areas on part 1, retreat 1.5 cm from the stitched part 2. Bending parts 3, glue their free longitudinal sections to part 1.

3. And finally, we glue part 2 onto the one-piece flap of the business card (part 1) and adjust it on three sides (ill. 23, 24). This pad, firstly, gives rigidity to the valve, and secondly, it is an additional flat pocket. The finished business card holder is shown in Fig. 1b.

For a finished look, all corners of both products can be trimmed slightly, no more than 1 mm, with a knife (ill. 25).

Source: Atelier magazine

pokroyka.ru

DIY leather wallet

As you know, a good leather wallet is not cheap. And, unfortunately, the high price of this accessory does not guarantee its durability at all. A handmade leather wallet will not only become a stylish addition to your look, but will also last a long time. And of course, there is no better gift for a loved one! Therefore, our today’s master class will be dedicated to the search for a solution on how to make a men’s leather wallet with your own hands.

Master class on making a leather wallet with your own hands -

For work we will need:

• a piece of thick leather about 0.2 m2 in size;
• strong threads of a suitable color;
• scissors;
• roller knife;
• metal ruler;
• awl;
• 2 needles.

Let's get started

You can also sew a wallet from leather with your own hands.

womanadvice.ru

How to sew a wallet quickly and easily

A wallet is an important, one might even say, necessary thing in everyday life. Wherever we go, it is almost always in our bag or pocket. It can be an unpleasant situation when, standing at the checkout, you realize that you forgot your wallet with money at home or in the car.

Wallet as an important thing in everyday life

We need a wallet not only to store money, it is also a container for bank cards, discount cards and numerous business cards.

There is a huge variety of wallets - both men's and women's models. They differ in size, number of compartments and, most importantly, material. Some people prefer leather models, such as pigskin, crocodile, snake or ostrich. Some people prefer artificial materials: dermantine or fabric. And some people prefer to get creative and sew the wallet of their dreams themselves. Why not? After all, it’s quite a useful skill to know how to sew a wallet without resorting to the services of a seamstress. The main thing is to decide on the pattern.

How to choose a wallet

Nowadays, a wallet not only carries a functional load, but is also a striking accessory. By looking at a wallet, you can determine a person’s taste preferences, as well as his financial situation. Wallets from leading brands are made of genuine exotic leather and are often decorated with rhinestones or stones.

In any case, it is a generally accepted fact that men choose a model based on its quality characteristics, while the fair sex prefers a model to be beautiful and suit their style.

And many needlewomen are even interested in how to sew a wallet with their own hands at home, without having any special sewing skills. And once they figure it out, they make unique models.

How to make a fabric wallet at home

Let's figure out together how to sew a wallet without spending a lot of time and effort on it. First we need the necessary materials and tools.

So, let's look at how to sew a wallet from fabric.

That's all. Now you know how to sew a wallet quickly and easily. You can use other patterns, then the model will be different.

DIY leather wallet

How to sew a leather wallet? Leather wallets are durable and long lasting. Therefore, take your choice of leather seriously; it is better to go to specialized stores.

You will need a sewing machine, since leather is a fairly dense material, and making an even seam by hand is quite problematic. The threads also need to be matched to the color of the main material. Having made the pattern, get to work.

It is advisable to make the seam small, then the wallet will look more neat. What to do if you don't have a sewing machine? This will complicate the task somewhat, in the sense that you will need to practice making a nice, neat seam. You can work it on extra pieces of leather.

In addition, it will take a little more time, since your fingers will get tired from working with dense material.

Seamless wallet

As an option, we offer you this creative model, the creation of which does not require sewing at all. You can make such a wallet very quickly, and it will look very interesting.

Just imagine that you are making an envelope out of paper, and now do the same with leather and attach a button.

Other materials

Materials can be combined, as leading brands often do. For example, make an insert from natural wool or fur on a leather base or combine different types of leather. It will look very impressive.

Remember that natural materials are always stronger and more durable, unlike artificial ones.

Here's another example of a cute wallet.

Try, experiment and over time you will understand how to sew a wallet with your own hands. You can come up with patterns yourself, without limiting your flight of imagination, in which case you have every chance of becoming the owner of an unusual, original wallet.

fb.ru

making a leather wallet – Crafts Fair

Today we will tell you how to make a leather wallet.

This master class is made for those who decide to start making leather goods, or try to make a small wallet with their own hands at home, which will require a minimum of equipment and tools.

In order to make a leather wallet, you will need the following tools and materials:

Hammer, 2 mm punch, rulers, stationery knife, ruler with circles of different diameters, blue pen, silver pen for marking, scissors (preferably for leather), cardboard 0.5 mm, genuine leather 1.5-2 mm.

You will also need equipment: a machine for installing accessories. If it is not possible to purchase such a machine, then you can try installing the fittings with a hammer (which can lead to their deformation), or buy a manual machine for installing fittings.

In order to cut the material, you need to build a pattern.

To do this, take 0.5 mm cardboard and, using rulers, build a figured pattern as in the photograph, according to the specified dimensions. The overall dimensions of the pattern are 208x160 mm, 198x75 mm, 43x34 mm.

After cutting out the shapes, use a knife to make 2 slots for cards on a 208x160mm pattern, according to the dimensions indicated in the photo. And 2 slots on the patterns 208x160 and 198x75 mm, for straps, according to the specified dimensions. Use a 2mm punch to make holes where the slots end. Also make holes using the same hole punch, according to the dimensions indicated in the photo. Make all the necessary cuts on the patterns, and round off the ends using a ruler with circles and a blue pen. In our case, the diameter of the circle is 14 mm. Then we cut off the curves with scissors.

Let's move on to cutting the leather. Take the leather and place the patterns on it.

Use a ruler and knife to cut the cut. Without removing the pattern from the skin, punch holes using a 2 mm punch along the pre-made holes and make slits. Using a marking pen, trace all the curves and use scissors on the leather to carefully trim.

You need to cut two parts measuring 43x34. The second should be a mirror image of the first; to cut out the leather, turn the pattern over so it’s the other side.

And now you have the finished details of the wallet cut.

The leather is thick and in order for the wallet to fold well, you need to form folds.

We bend the protruding internal parts and tap the bend points with a hammer.

We begin assembling the parts.

We connect the inner pocket 198x75mm using holniten to the base 208x160. Since the pocket is 10 mm smaller, after installation it is solid, the base will bend.

Then we bend two pockets with slots for cards, and also connect them using holniten.

We also attach both upper straps using holniten.

The final stage is to insert the straps into the slots of the pocket and the inner pocket for bills. We tighten it well, connecting the parts together.

When folded, the size of the wallet is 100x83 mm.

You can insert 4 cards into the wallet, 2 in one pocket.

All bills fit freely into the main compartment.

The wallet fits easily into a trouser pocket.

Thank you very much for your attention! The wallet is ready.

Sincerely, the team of the Russian Workshop company.

You don't have to buy a wallet! You can do it yourself. For this, the diagrams and tips listed in this article will be useful to you.

It's no secret that a leather wallet is quite expensive. That's why it's worth trying make it yourself, thereby saving a lot of money. For this craft you will need a small piece of natural or artificial leather.

You can take this material from an old bag, jacket, trousers or skirt. Perhaps you once had leather upholstery on your armchairs or sofa. There are many options. Besides, will need:

• Scissors
• Thick threads
• thick needle
• Ruler
• Thimble on finger
• Metal button or special magnet for bags, decorative elements as desired.
• A glue gun (or a tube of high-quality superglue).

Completing of the work:

• Think in advance about the desired size of the wallet: its length and width.
• Cut out the blank (see pattern), be careful: each side of the pattern must be equal to its opposite side. Measure all edges with a ruler.
• For fastening, you can use rivets and a clamp for them, but they can also be successfully replaced with hot glue, superglue or thick sewing thread.
• The cut out pattern should first be folded on the sides. These will be blanks for pockets for plastic cards.
• The next step is to fold the bottom part up.
• Secure the bottom part with the sides using rivets, glue, or sew them with thread (whichever is more convenient for you).
• Check the sides of the product, if you see holes from folds, the wallet should be stitched on the sides
• Attach the clasp to the top of the wallet. Use a button, a magnet, or a regular button as a clasp (for the button, sew a loop at the bottom of the wallet).
• If you wish, you can decorate the product with decorative elements: rhinestones, metal buttons, figures, chains, appliqués.

Wear a thimble on your finger while sewing. It will help protect you from needle pricks, because skin is a dense material and requires strong pressure when piercing.

Pattern for a leather wallet

How to sew a fabric wallet with your own hands: patterns

Each needlewoman can sew her own wallet from fabric. To do this she will need:

• A piece of facial tissue measuring 21 by 30 centimeters.
• Soft lining material measuring 21 by 30 centimeters.
• A seal measuring 21 by 30 centimeters (non-woven fabric, for example)
• The inner part is fabric measuring 21 by 30 centimeters.
• Adhesive-based seal (fabric for bags). You need two pieces measuring 21 by 9 centimeters and one measuring 21 by 7 centimeters.
• Wallet clasp (rivet or magnet).

Material required for a fabric wallet

All main pieces of fabric should be folded together (see photo “step No. 1”).

Step #1

Each piece of material is sewn tightly together using a sewing machine or by hand. This must be done as carefully as possible so that you end up with a beautiful wallet.

Step No. 2 - sewing the parts

Do not immediately attach the outer edges of the product. It is necessary to make a mark for attaching the fastener. After this, attach the magnet or rivet. Sew the product on all edges.

Step No. 3 - attaching the clasp

Step No. 4 - stitching on the edges

You will get a solid blank for the wallet, which will bend very well in the right places.

Step No. 5 - blank for the wallet

To make the product look neat, you should cut off the sharp corners on the front side of the wallet and stitch the product.

Step #6 - Rounding Corners

The inside of a fabric wallet. You will need:

• A rectangular piece of fabric that should be glued with non-woven fabric in advance. The fabric should measure 19 by 18 centimeters.
• A rectangular piece of fabric that should be glued with non-woven fabric in advance. The fabric should measure 19 by 17.5 centimeters.
• A rectangular piece of fabric to decorate the ends of the zipper. Size: 3 by 4 centimeters - 2 pieces.
• Zipper (needed for the coin compartment) - length 16 centimeters.

Interior decoration of the wallet

Pattern for the side of the wallet

Design of a zipper for a wallet

The pieces of fabric are folded and stitched on both sides. The sides should be secured. After this, the pocket is inserted into the wallet blank. The next stage is the manufacture of side parts according to the workpiece.

Folding the inner and outer parts of the wallet

The side of the wallet is first sewn to the pocket. Then it should be manually sewn to the outer part and, using edging, carefully stitched on a machine.

Sewing the side of the wallet

Ready product

How to sew a wallet from denim: photo

Old jeans can be easily transformed into comfortable and beautiful wallet. This fabric is dense. This feature will allow the product to “keep its shape”. In addition, jeans have become fashionable recently. This accessory is sure to attract attention and will become your everyday item.

To make it you will need:

• A small amount of mesh fabric (large).
• Knitted material for lining (any material you can find).
• Velcro as a fastener
• Lightning (short)
• Sewing thread and needle, sewing machine
• Scissors
• Denim (one leg)

We take blanks from different types of fabric and sew them to each other according to the template. (see photo)

Preparing a blank for a denim wallet

Be sure to stitch along the outside of the product to make the wallet look neat.

Side stitching on the wallet

Make a coin compartment from another piece of denim. Trim it inside with knitwear. Fold the rectangle in half. Sew a zipper to the product. They will protect the inner pocket.

Sewing on a zipper

Place the two items together so that you have two sections - for change and bills. The longer part will go around the wallet and fasten with Velcro. Sew it to the edge.

Sewing Velcro

Ready product

How to make a wallet from felt: patterns, photos

Felt is enough dense and pliable material. That is why it is often used in a variety of crafts, handicrafts, and toy making. In particular, from felt it can It will make a wonderful wallet.

Felt is pleasant to work with; the wallet is very wearable and able to keep its shape. The main thing is not to choose thin felt, The thicker and denser the material, the better. The peculiarity of making a wallet from felt is that it does not require edging, which means that its production will take you little time and effort.

To make a wallet you will need:

• A piece of felt measuring 30 by 30 centimeters
• A piece of felt of a different color measuring 4 by 20 centimeters.
• Metal buttons for fastening - 6 pieces
• Metal buttons for fastening - 2 pieces
• Sewing needle
• Threads
• Hammer (for driving buttons)

Pattern for a felt wallet with your own hands

Performance:

• Cut out all the necessary shapes according to the template, according to the pattern.
• In the side parts, where there should be a fold, you should bend the material and secure it with buttons.
• The hole for the button must first be made with a needle.
• Secure the buttons with a hammer
• Attach snap buttons
• If desired, you can thread the edges of the product for decorative purposes.

Ready product

Video: “Making a stylish wallet from felt”

Other options for felt wallets:

Children's wallet made of felt "snail"

Stylish children's wallets in the form of animals

Felt wallet with zipper and embroidery

Felt wallet

Crochet beaded wallet: pattern

You can even make a beautiful wallet from beads. This will require a lot of time and patience. In addition, you need a large amount of beads and a pattern that will help you weave the product correctly.

You should also purchase a base for the fastener in advance. This is a metal double bow with a “Kiss” clasp.

Pattern for weaving a beaded wallet:

Scheme

Ready product

DIY children's wallet: diagram

Children's wallets are different stylish design with humorous images of toys or animals. Such a wallet is quite miniature, because it should not store a lot of money, but only pocket money and change.

Such wallets can be made from ordinary knitted fabric, denim or felt. You can decorate the product with decorative embroidery, applique or beads. Take the time to sew a chain onto a keychain to your wallet. This way your child can attach it to a backpack or purse so as not to lose it.

Schemes and patterns for sewing a children's wallet:

Option #1

Option No. 2

Option No. 3

Crocheted wallet: pattern

A cute wallet for storing paper money and coins can be knitted or crocheted. It will be useful for this Some useful diagrams:

Option No. 1 with knitting needles

Option No. 2 knitted, openwork wallet

Option No. 3, knitting needles

Option number 4, crochet Option number 5, crochet

How to make a wallet from rubber bands?

Modern children are actively interested in weaving from rubber bands. It turns out that a stylish miniature wallet can also be woven from this material. To get a neat product you will need a special machine and a detailed video tutorial.

Video: “Wallet made of rubber bands”

How to make a coin purse with your own hands?

A coin purse is a stylish accessory that can be kept in your purse. It can be made from various materials and decorated to your own taste. Very often, such a wallet has a ring for attaching to keys and serves as a kind of keychain.

Coin wallet, diagram

Coin wallet option

How to make a women's wallet with your own hands?

You can make a wallet from materials such as cardboard and fabric. In this case, cardboard will serve as the basis that will make the product “keep its shape.” And the fabric will decorate the wallet and transform it. Additionally, you will need glue to hold the material to the cardboard.

Wallet step by step:

DIY wallet

How to make a zipper wallet with your own hands?

Try making a zipper wallet out of thick felt. Such a product will reliably store not only your money, but also other small things: keys, medicines, receipts and much more.

All patterns are accurately measured with a ruler and cut out. They should be sewn with a thread of a contrasting color (even stitching). The zipper is attached in advance from the inside.

Patterns for a wallet

How to attach a zipper?

How to make a men's wallet with your own hands?

It is best to make a men's wallet from artificial or genuine leather. Such a product will not only be durable, but also very beautiful.

Pattern for a purse

How to decorate a wallet with your own hands?

The most popular way to decorate a wallet is rhinestones and stones. This material is very fashionable and in demand, so you can easily find it in craft stores. in a large assortment.

It is best to glue rhinestones with hot glue or superglue. Use tweezers when working so that your product does not get dirty and the result looks neat. Before gluing the rhinestone to the wallet, it is best to plan the product design in advance.

Wallet decor options:

Option #1

Option No. 2

Option No. 3

How to clean a leather wallet?

A leather wallet is an item of daily use. That is why it often gets dirty and because of this loses its appearance. To avoid unpleasant situations with showing off a dirty wallet and help your accessory keep a “worthy appearance”, you should use Recommendations for cleaning it:

• The inside of the wallet must be wiped with a dry cloth.
• You can also wash your wallet with a weak soap solution, previously whipped into foam.
• If you wash your wallet with a sponge or cloth, carefully wring it out to remove excess moisture.
• After you have wiped your wallet with a damp cloth, dry it with a dry towel.
• Wait for it to dry and lubricate the wallet (only those made of genuine leather) with a minimal amount of topical lotion or hand cream.

Video: “How to clean a leather wallet?”

After learning how to sew a leather bag, document organizer, wallet, headphone holder, ballet shoes, and jewelry from this material, you will be able to create these designer items with your own hands.

How to sew a leather set?

If you have small scraps of this material, you can turn them into practical items that make an interesting kit. This master class will clearly explain how to sew a bag in the shape of a fish, a holder for wires and headphones, light ballet shoes, and a case for glasses from leather.

First you need to make things that require more material, and then you can move on to those that can be created from leftover leather.

How to sew a leather bag?

To sew a bag in the shape of a fish, you first need to redraw an image that will help you make a pattern.

Now you have an idea of ​​how many parts this reticule consists of. You will need a pattern for each piece, they are given below.

It will be enough to attach each pattern to a piece of leather of the corresponding color and cut it out with a seam allowance.

If your source material is also thin, as in this case, then also compact it with adhesive dublerin. To do this, fold these two materials and iron them from the doubler side.

Set the iron to the “cotton” mode, and under no circumstances turn on the steam function, otherwise the workpiece may stretch and lose its desired shape.

Where the seams will go, you need to cut off the dublerin so that later these blanks can be easily turned out and do not bulge.

The upper part of the fins should be placed on the skin and stitched around the perimeter. Blue leather has a white end, you need to paint it with this paint. Use water-based acrylic that adheres well and resists water once dry. To ensure that the surface of the future handbag is smooth and this end of the leather does not get wet, lubricate it with SMS powder diluted in water.

Let the paint on the fins dry while you sew the fish's head. Stitch together the pieces that make it up and make the stitching more decorative by stitching a seam on the right and left side of the front side. Of course, you first need to iron the fabric on one and the other side of this seam.

Here's how to further sew a leather bag for which you translated and cut out the patterns with your own hands. Now sew the fins to the top of the fish and sew the back parts together.

To smooth out the bulk seam, use an anvil or similar object. Place the workpiece on it with the seam facing up and tap it. Now you can turn this part right side out and decorate the seam with two parallel decorative stitches.

Now you need to sew on the zipper. You can use the same color as the head or other parts of the fish's body.

If you use a lining, attach it to the back of the workpieces. Please note that the seam allowances need to be cut after stitching. Then the finished product will not bulge and it will be easier to turn it right side out.

Turn the bag inside out and gently tap the seam with a mallet to smooth it out. Now add decorative stitches.

Sew buttons instead of eyes or attach buttons using a special device.

Connect the center of the back with the inside of the head, turn the workpiece right side out. Stitch the remaining parts. Do the same with the second part of the fish.

Connect these two pieces by attaching them right sides together and sewing.

Now you can put the slider on the detachable zipper and fix it.

After you turn the bag out of the leather, you will need to complete its creation. To do this, cut out these straps from yellow leather. One is useful for carrying the bag in your hand, the second for putting it over your shoulder. Sew metal fittings to these elements and to those on the bag to which they will be attached.

Use a hidden seam to sew the lining to the zipper on the arms.

All that remains is to put the straps on the bag, after which you can surprise your friends and others with such a fashionable accessory.

DIY shoes

This handbag will look wonderful and harmonize with light ballet shoes. See how to sew your own shoes.

First, redraw the presented pattern. It is designed for size 38. Consists of two sheets.

Transfer them onto paper and cut them out. Now connect the parts of shoes made of this material to see if these ballet flats are right for you. If they don't fit just a little, then make adjustments to the pattern at this stage.

Place it on the prepared skin, outline and trim. Also don't forget to cut out the insoles.

Place them inside the ballet shoes, gluing them to them. When the glue dries, then stitch it on the machine. To ensure that the sandals stay on your feet well, make 2 slits on the strap.

Cut small rectangles from double-sided tape and glue them to the wrong side of the shoe strips. Now you can attach these parts and then sew them.

Here's how to make leather sandals next. They are decorated with pieces of blue material so that this item matches the created handbag. These decorative inserts will also remove the places where the straps meet the toe of the shoes.

Cut out the soles from thick rubber, attaching a pattern to these blanks. It can be made based on other shoes that fit you. You also need to glue small heels to the back of the sole.

All that remains is to glue the sole to the shoes and wait for the glue to dry, so that you can then show off in this new thing.

Here's what you needed to make your own leather shoes:

• a piece of artificial leather;
• scissors;
• stationery or construction knife;
• Double-sided tape;
• leather glue;
• threads;
• a needle;
• sewing machine;
• rubber for soles and heels.

You'll probably have some scraps of leather left over that you can turn into a glasses case. If you don't wear regular ones, it will come in handy for solar ones.

Case for glasses

Redraw the pattern that is in the photo below.

Place the pattern on the material and cut it out. The most convenient way is to close the case with a button. But then you need a special device to attach it to the skin. Topstitch along the straight edge. Also make a stitch on the opposite rounded side. Fold the workpiece almost in half and glue or sew the sides.

All that remains is to tie the ends of the threads so that the stitch does not unravel. Hide the knots and admire what a wonderful case for glasses you have made with your own hands.

How to make a holder?

You will create a device for headphones from a very small piece of fabric. Then you won't have any more tangled wires if you take them with you.

This item will also continue the “fish theme”, so the pattern is made in the form of a fish skeleton. Place it on the back of the skin and outline. In total you will need two such parts. Sew them together, but leave a centimeter on both sides unsewn. These holes are needed for you to thread wires through here.

What a wonderful kit this will be.

If you don't want to have a set, then you can create a spacious handbag.

How to sew a leather bag with your own hands?

The size of the finished bag is 42 by 36 cm. It consists of two parts that must first be cut out. They will turn out like this.

Each of them measures 50 by 38 cm. Leave one centimeter for the seams, and add 5 cm on top for the hem. The bottom corners of these triangles should be rounded. To do this, take a regular roll of tape, place it here and outline it.

Then you will need to mark the darts so that the bag gains volume. These angles are 45 degrees.

The length of the dart is 3 cm. Take the Moment glue and attach the dart with it. After this, let the solution dry and you can stitch in this place. Then use glue to connect the parts if your bag also consists of four rectangles.

Once the glue has dried, stitch along these areas and then tap with a mallet to smooth out the leather on the seams.

Apply a little Moment glue to the back of the allowances and fix them in a horizontal position.

Now you will need to make decorative stitches along the main seams.

Speaking about how to make a bag with your own hands, it should be noted that it is necessary to periodically apply a ruler to the perimeter and level it, cutting off the excess.

You need to cut out the lining according to the size of the sewn bag. If you are making a knapsack with a pocket, then you need to make this part out of lining fabric.

Place two pieces for the pocket on one and the other half of the bag and sew, connecting them together with a seam.

Then you will need to sew it on a machine, at the same time sewing a zipper on the pocket.

Sew a lining with a pocket to the size of the bag.

Now we need to make the handles.

To remove excess thickness from the handles, remove some of the suede from the underside with a sharp blade.

Fold each handle in half crosswise and stitch on the wrong side. Then turn it right side out. Set aside the edges of the handles.

If you have previously sewn the lining on top to the bag, then carefully cut at the top, insert a handle here and stitch.

If not, then insert the edges of the handle between the lining and the leather, and then topstitch the product.

If your sewing machine cannot handle this thickness, then attach the handles using one of the following methods.

Now you have an idea of ​​how to sew a bag with your own hands. Therefore, you will be able to cope with the creation of your next product.

How to make a document organizer?

You can create it according to the size of your documents and the desired thickness.

To make a wallet like this out of leather, you will need:

• paper;
• pencil;
• ruler;
• cardboard;
• awl;
• mallet;
• leather punch;
• wax;
• waxed threads;
• Genuine Leather;
• needles for working with leather.

You can use the pattern presented or create your own according to the dimensions of your documents.

First draw the pattern on paper, then transfer it to cardboard. Now you can cut out elements of a wallet from leather.

Using a sharp knife, carefully round the corners. Now you need to create uniform holes on those parts of the wallet that you will sew together. This can be done using an awl or a special tool.

To ensure that the holes are at the same distance from the edge and from each other, it is better to first make them in a cardboard template, and only then apply it to the leather elements and make holes.

Now put the pieces together. Before this, you have one large rectangular part, one small rectangular part, which will be on the left, and another small rectangular part, the larger side of which is cut at an angle. These details are located on the right. Combine these elements and sew them on your hands.

Now you can fold the wallet in half and beat it with a mallet at the fold to give it the desired shape. After this, you can put documents in your pockets so that you can carry them with you.

Of course, money also needs to be hidden somewhere. For them, you can create a beautiful wallet, which you will sew from leftover leather so that it is in harmony with the rest of the products. If you wish, make a two-in-one device.

How to sew a leather wallet - master class

First, you will need to cut out a rectangle from cardboard to get an idea of ​​what size the wallet will be. Fold this template in half and see what the wallet will look like. If the size suits you, then move on to cutting out smaller parts. They are shown in the following photo.

Now use a punch or an awl to make holes that will help sew the parts together. Start with a pocket where you will put your change, as well as a flap that will help close the leather wallet. Sew the listed parts using these holes.

leather glue;

scissors;

candle;

hair clip;

if there is, then a punch.

Using a printer, translate the presented pattern for the hairpin and ring.

First, cut it out of paper, and then apply this template to the skin and cut out the parts from it.

Using punches you need to make holes in various places. If you don’t have such a tool, do it carefully with nail scissors. Using them, make larger holes in the finger ring.

Using a sharp knife, carefully cut holes in the larger petals.

To make flowers with concave petals, hold each part slightly above the candle flame.

Glue a small flower to the back of the ring. Make two slits in another small flower. Insert a hairpin here and glue this blank with the front side to the wrong side of the hairpin blank.

Thread each small petal through the slit on the larger matching petal.

This is how wonderful leather jewelry looks from the front and back. If it seems to you that there are not enough holes at the edges of the petals, make them. And if you want to see for yourself how amazing things can be made from leather, then sit back and watch the fascinating processes.

If you are interested in how to sew a leather bag, then take a closer look at the intricacies of the first plot. You can create a handbag from an old leather raincoat, just like the heroine of the video.

And make leather jewelry from the remnants of this material.

Leather is a noble and very expensive material. This wallet model is very simple, so you don’t need to have any special skills, just your diligence and perseverance.

Such a wallet can be sewn from a small rectangle of leather, for example, a favorite but outdated bag.

To make a handbag we will need:
1.Handbag templates.
2. Natural or artificial leather. You can take suede.
3.Needles and thick synthetic threads.
4. Stationery knife.
5.Glue.
6.Awl or special punches for holes for thread.
7. Clothes rivets.
8.Lighter.
9.Printer.
10. Punchers, hammer.

Wallet patterns:

First, print out the handbag templates onto paper; it’s better to make several copies. Depending on the size of the handbag, the templates can be increased or decreased, just keep in mind that there are several templates and you need to change their scale proportionally. Using paper templates, we cut out leather templates.
Using paper templates, we make folds on leather blanks.

The thick line on the template marks the seam line along which the leather blanks will be joined into a single whole.
Along the seam line, using an awl or special punches and a hammer, we make holes on the leather blanks.

Then we combine and sew the leather blanks together using thread and a needle.

We insert rivets into the leather templates; the installation locations are marked on the paper template. It must be done very accurately and carefully. For tear strength, we insert rivets into the body of the bag through an additional flap of leather.

Now we assemble the bag along the folds, according to the template, close it, and check for correct assembly.
The last step is the seams on the side folds of the handbag, done somewhere to the middle of the side, complete them and the handbag is ready. Try it and. You will succeed, such a handbag, made with your own hands, will not be a superfluous accessory to your everyday life. This is what the finished wallet looks like:

Suede wallets:

How to make a wallet from genuine leather MK, another photo MK

So for the job you will need tools, thread and leather.

Another wallet option:

In the finished version you will receive a simple and practical wallet. You can not only carry it with you in your purse, but also on your belt or even your neck.

Step-by-step master class.

To do this, it is not at all necessary to purchase a piece of leather in a store; at first, it is recommended to use things that have served their purpose for a long time. For example, a bag, gloves, boot tops, etc. You will need: a piece of leather, glue, a needle, strong threads (you can choose a contrasting color), a thimble, two metal rings and a metal button.

1. Enlarge the specified pattern to the required size, print it, and then cut it out.

2. Transfer the finished pattern to the wrong side of the leather piece - trace the pattern with a pen and cut it out, being sure to leave a few millimeters of allowance.

3. The resulting piece needs to be folded in half (face to face) and stitched from the first to the second point “A”, in this case you will sew the side, as well as the bottom of the wallet. Now repeat this step on the other side to sew the side part between the “B” points. Sewing leather is not easy, so use a thimble, it will make the task much faster and easier.

But if you find making wallets tedious or find them bulky and large, consider money clips. This is a stylish and convenient means for carrying banknotes.

4. When you have completely sewn the sides, you need to turn it right side out, and then sew two metal buckles (rings) on the sides. This is not just a decoration, you can attach a handle to these small details to make it easier to carry if you don’t have a bag at hand.

5. Now you need to make a belt. To do this, take a piece and cut six long narrow strips. Then you should thread three pieces through the metal ring and start braiding, make the length of the handle at your discretion. Now repeat the action and make a second handle. This detail of your accessory will look more original if you choose leather of different colors. You can secure the ends with a regular paper clip.